All About Carpet And Upholstery Cleaning Gazette News

Which is the Best Way to Get Carpets Cleaned?

Oct 17

When it comes to cleaning carpets, the best method to use depends on the situation. If you're dealing with an animal mess, you can combine vinegar, salt, and borax into a paste. The Thriving Home blog recommends using about 1/4 cup of each. You can then apply the paste to the carpet. Before beginning, be sure to wear gloves, as the mixture can contain bacteria and borax is very abrasive.

Hot water extraction cleaning

Hot water extraction is the best way to clean carpets because it dispenses with soil and moisture and dries the carpet faster than other methods. This type of cleaning can also be beneficial for commercial properties where packages or pets track dirt into the building. The process begins with the application of cleaning agents, which liquify and displace soil, debris, allergens, and other particulates. Some professional carpet cleaners also incorporate encapsulation options to remove additional soils from carpets. The use of hot water, however, can affect the bonding ability of these encapsulants.

In addition to removing stains, hot water extraction uses eco-friendly cleaning solutions and gentle detergents. A specialized wand applies high-pressure liquid directly on stained spots. This high pressure dislodges dirt particles and makes the carpet easier to clean. If necessary, the cleaning specialist may also apply a chemical that will soften stains, reducing their likelihood of re-staining. Hot water extraction can also remove up to 95% of the moisture from a carpet.


Carpet encapsulation uses a unique cleaning process to remove dirt, stains, and odors from carpets. The process uses a specially formulated detergent that is brushed into the carpet fibers. The detergent surrounds the soil particles in the carpet fibers and crystallizes them. These soil particles are then easily removed by vacuuming. Carpet encapsulation requires less drying time than other carpet cleaning methods, allowing for faster service.

Encapsulation is less expensive than extraction, making it a good choice for hotels, hospitals, and commercial settings. In addition, encapsulation is more environmentally friendly, so it is a good choice for budget-conscious customers. The equipment used in the process lasts a long time, so the on-going cost of encapsulation cleaning is relatively low. This method is also fast, with carpets drying within an hour.

Chemically cleaned carpets

The use of a chemical in carpet cleaning process has several advantages. This method usually results in a carpet that is ready for use right away. It can be very effective at removing stubborn stains and dirt and may even eliminate excess bacteria. Unlike shampooing, chemically cleaned carpets do not require any rinse process after cleaning.

Chemically cleaned carpets will typically be softer than natural carpets. The pH level of the carpet is important when choosing a cleaner. If the pH is too high, the carpet could become damaged and discolored. Luckily, chemically cleaned carpets are safe for children and pets.

Spot cleaning

Spot cleaning is essential for keeping your carpets clean. If you don't have a carpet cleaning machine, you can use a simple remedy such as vinegar and water. The trick is to test the solution first on an inconspicuous area of the carpet before applying it to the entire carpet.

For most stains, you can use a wet rag to blot them out. However, if they are particularly stubborn, you can try a salt solution. This solution acts as a buffer and removes stains by removing dirt from the fibres. To make the solution, mix one part of white vinegar with three parts water. Then, apply the solution to the stained area and let it sit for twenty minutes.

Baking soda and vinegar can also be used as spot cleaners. These two ingredients are naturally absorbed by the fibers of the carpet and can lift stains. Simply sprinkle the baking soda over the stain and pour the vinegar on top. After the mixture has dried, you should vacuum the carpet.


Vacuuming carpets regularly is a very effective way to clean them and remove a lot of dirt and debris. However, carpets require more maintenance than hard floors and vacuum cleaners are not enough to get rid of all dirt. Spots, spills, and embedded dirt must be thoroughly removed with a professional cleaner. For best results, it is a good idea to deep clean your carpets every six months or so. The best way to do this is to use a seal of approval certified vacuum cleaner. This will ensure that you are using a solution that is safe for your carpets and will maintain the life of them.

Depending on the type of carpet, you can make several passes over an area. However, increasing the number of passes will reduce the amount of dirt that can be removed. Research conducted in laboratories suggests that increasing the number of passes over a carpet does not increase the cleaning efficiency significantly. You can also use different accessories such as a crevice tool to get deep into a carpet.